Heishin® PC Pump

General-purpose Series

Standard model Heishin PC Pumps that support an extensive array of applications

NE

Standard model that supports watery fluids to high-viscosity fluids with different properties

NE

Characteristics

  • Conveys a range of materials from watery fluids and high-viscosity fluids to high-concentration slurries in metered flow without pulsation.
  • Choose from a variety of driving units to suit pressure and on-site environment.

Performance

Discharge volume 0.05 to 158 m3/h
Discharge pressure Max. 7.2 MPa

Applicable fluids

Food: Miso paste, Malted rice, Moromi, Syrup, Nigari, Laver
Chemical: Emulsions, Latex, Agricultural chemical ingredients, Ink, Sealants, Solvent, Mold-releasing agent, Heavy oil, Concentrated sulfuric acid, Chemicals
Electrical machinery: Epoxy resin, Silicone resin, Urethane resin, Ammonia, Sodium hydroxide, Pure water
Environment: Polluted sludge, Unprocessed human waste, Activated carbon slurry, Slaked lime slurry, Polymer (polymer coagulant), Lubricant
Paper manufacturing: Paper-coating color, Pulp, Dye, Viscous agent, Calcium carbonate, Talc

NES

Wide suction inlet type for fluids with low fluidity

NES

Characteristics

  • Wide suction inlet supports metered conveyance of fluids with low fluidity.
  • Compatible with a variety of driving units according to pressure and on-site environment.

Performance

Discharge volume 0.07 to 34.6 m3/h
Discharge pressure Max. 7.2 MPa

Applicable fluids

Food: Cooked beans, Sake lees, Butter, Margarine
Chemical: Ink, Aluminum hydrate
Environment: Food scrap paste
Paper manufacturing: Long-fiber pulp, High-concentration pulp

NYS

Wide suction inlet type for fluids with low fluidity (with integrated driving unit)

NYS

Characteristics

  • Wide suction inlet supports metered conveyance of fluids with low fluidity.
  • Integrated inverter motor achieves compact size and contributes to energy efficiency.

Performance

Discharge volume 0.032 to 9.87 m3/h
Discharge pressure Max. 1.6 MPa

Applicable fluids

Food: Cooked beans, Sake lees, Butter, Margarine
Chemical: Ink, Aluminum hydrate
Environment: Food scrap paste
Paper manufacturing: Long-fiber pulp, High-concentration pulp

NY-G-MN

Chemical injection pump capable of high-pressure injection

NY-G-MN

Characteristics

  • Supports chemicals such as sulfuric acid, sodium hypochlorite and PAC. Capable of high-pressure injection up to 0.6 MPa.
  • No shaft-sealing part---leak-free design.
  • No gas lock.
  • Highly responsive and allows for instant flow rate control by means of signals from various sensors.
  • Available in different corrosion-resistant materials tailored to the conveyed fluid.

Performance

Discharge volume 5.8 to 53100 mL/min
Discharge pressure Max. 0.6 MPa

Applicable fluids

Environment: Concentrated sulfuric acid, Dilute sulfuric acid, Sodium hypochlorite, PAC, Aluminum sulfate, Caustic soda, Sodium carbonate